3
INSTALLATION INSTRUCTIONS
I. MOUNTING THE AUTO PUMP STATUS CENTER
1. Mount the pressure sensor interface in a suitable location protected from moisture and excessive
heat.
2. The indicator is designed to be mounted on the exterior of a vehicle so that the PSI condition may
be easily viewed.
II. WIRING THE AUTO PUMP STATUS CENTER
1.
See figure 1, Wiring the Auto Pump Status Center.
2.
Connect the air supply to the air pressure sensor input port using 5/32 tubing. A straight fitting,
1/8 NPT, is supplied for connecting to the air tank.
3. Connect DC input power to the 2-pin terminal. For continuous operation, supply continuous power
to the pressure sensor interface.
4. Connect the indicator to the 4-pin terminal located on the pressure sensor interface.
