Küschall KSL, Руководство пользователя

Страница: 15 / 48

Product Overview
In addition to the standard backrest cover, there are
tension-adjustable backrest covers available.
Adjusting the Tension of the Backrest Cover
1. Remove the backrest cushion A .
2. Loosen the hook-and-loop straps B on the rear of the
backrest cover by simply pulling on them.
3. Tighten or loosen the bands as required then reattach
them.
WARNING!
Risk of Tipping
If the bands are set very loose, the tipping point
of your wheelchair is changed for the worse.
– Ensure that the bands are set correctly.
IMPORTANT!
There is a risk that the geometry of the
wheelchair is changed when the bands are
overtightened.
– Do not overtighten the bands.
Backrest Height / Backrest Angle
The height and the angle of the backrest can be adjusted.
The adjustment must be carried out by a qualified technician.
WARNING!
Risk of tipping
The hanging of additional load (back pack
or similar items) onto your wheelchair back
posts can affect the rearward stability of your
wheelchair. This can cause the chair to tip
backwards causing injury.
– Therefore, Küschall strongly recommend the
use of anti-tippers (available as an option)
when using your back posts with additional
load (back pack or similar items).
Backrest Bar
WARNING!
Risk of Accidents
The backrest bar is not suited for lifting or
carrying the wheelchair with the user sitting in
it as it can break.
– The backrest bar may not be used to lift or
carry the wheelchair while the user is sitting
in it.
1659269-C 15