Küschall K-SERIES, Руководство по обслуживанию

Страница: 23 / 44

Instructions
6.4 Footrests
The footrest must be selected in accordance with the seat width. Standard footrests and angle-adjustable footrests are
available. Furthermore, there is a choice between a high-mounted footrest and a fold-up footrest.
Lower leg length (LLL)
To change the lower leg length, the footrest can be installed in a higher or lower position, see 6.4.2 Adjusting the footrest
height, page 23 . Also refer to the table in chapter 6.1 Frame overview, page 12 . The shortest lower leg lengths can be
achieved using a high-mounted footrest, see 6.4.5 Replacing the high-mounted footrest, page 24 .
6.4.1 Replacing the footrest
Allen key (4 mm) / Socket spanner (8 mm)
■□□
1. Remove the bolts, washers and nuts A on both sides.
2. Remove the footrest.
3. Insert the new footrest into the frame tubes and move
it to the required height.
4. Reinsert bolts, washers and nuts on both sides and
tighten.
A = 7 Nm
6.4.2 Adjusting the footrest height
The height of the footrest can be adjusted in steps of 10 mm.
Allen key (4 mm) / Socket spanner (8 mm)
■□□
1. Remove the bolts, washers and nuts A on both sides.
2. Move the footrest to the required height.
3. Reinsert bolts, washers and nuts on both sides and
tighten.
A
= 7 Nm
If the required lower leg length cannot be achieved, a
high-mounted footrest must be installed, see chapter
6.4.5 Replacing the high-mounted footrest, page 24 .
1659339-A 23