Küschall K-SERIES, Руководство по обслуживанию

Страница: 24 / 44

Küschall® K-Series
6.4.3 Installing/replacing the foot plate
Allen key (3 mm) / Screw clamps / Drill, drill bit (7 mm)
■■□
1. Position and fasten the foot plate A cleanly to the footrest B
using screw clamps.
2. Center punch the footrest through the holes on the foot plate.
3. Remove the screw clamps and the foot plate.
4. Drill completely through the footrest at the punched points.
5. Insert blind rivet nuts D into the four holes from above.
6. Position the foot plate again on the footrest and fasten with bolts
C .
C = 4 Nm
6.4.4 Replacing the angle-adjustable footrest
Allen key (4 mm) / Socket spanner (8 mm)
■□□
1. Remove bolts G from the frame tubes H .
2. Remove the footrest assembly (
A
and
B
) with the foot
plate C from the frame.
3. Remove all bolts
D
, washers
E
and nuts
F
from the
foot plate C .
4. Remove the foot plate.
5. Remove the telescopic footrest tubes A from the
clamping part B , if necessary.
6. Install a new angle-adjustable footrest by reversing steps
4 – 1.
F = 13 Nm
G = 7 Nm
6.4.5 Replacing the high-mounted footrest
Allen key (4 mm) / Socket spanner (8 mm)
■□□
24 1659339-A