manualshive.com logo in svg

Küschall Advance, Руководство по обслуживанию, Страница: 23 / 35

Поделиться
Скачать
Küschall Advance Скачать руководство пользователя страница 23

23

© Küschall AG, Switzerland | 2013-01

Service manual

Front wheels

Setting the steering error angle

Difficulty: 

 

˜˜™

 

Tools: 

 

 

10

  Loosen 

Ⓐ

 bolts.

  Hold spirit level against the front edge of the

Ⓑ

 fork.

  Turn the 

Ⓒ

 bolt, until the front edge of the fork is vertical.

  Tighten the 

Ⓐ

 bolts.

 

CAUTION!

Perform the same setting on both sides

.

Checking and adjusting the alignment of the 
supporters

Difficulty: 

 

˜˜™

 

Tool: 

 

Spirit level, 

Ã

 5 

  Tip the wheelchair backwards on a level surface.

  Check with a spirt level whether the surface 

Ⓐ

 of the supporter is 

vertical.

  If the supporter is not vertical, unscrew the screws 

Ⓑ

 with washers on 

the supporter.

 

IMPORTANT! 

Possible damage to the paint on the frame tube. 

Be very careful when inserting the supporter in frame tube.

  Align the supporter vertically by rotating it slightly around the frame.

  Retighten screws with new adhesive and washers. 

  Perform the same adjustment on both sides.

Shift supporter on the frame

Difficulty: 

˜™™

 

Tools: 

 

Ã

 

5

 

The supporter on the frame may be infinitely adjusted.

 

IMPORTANT! 

Possible damage to the paint on the frame tube. 
Be very careful when inserting the supporter in frame tube.

  Loosen the bolts 

Ⓐ

 with the washers on the supporter.

  Push the supporter into the required position. 

  Tighten the bolts 

Ⓐ

 with the washers on the supporter.

  Perform the same setting on both sides.

Ⓐ

 

à

  7 Nm (

high-strength

)

A

B

Ⓑ

 

à

  7 Nm (

high-strength

)

Ⓐ

 

à

  13 Nm 

Содержание Advance




































Отзывы:

Нет отзывов