“KUSAM-MECO”
AN ISO 9001:2015 COMPANY
“KUSAM-MECO”
AN ISO 9001:2015 COMPANY
25
m
A, mA AND A CURRENT FUNCTIONS
+AC
Press the
SELECT
button momentarily to select DC, DC
,
+AC
+Hz
DC+AC
& AC . Last selection will be saved as power up
default for repeat measurement convenience.
26
* Note : When measuring a 3-phase system, special attention
should be taken to the phase-to-phase voltage which is
significantly higher than the phase-to-earth voltage.
To avoid exceeding the voltage rating of the protection fuse(s)
accidentally, always consider the phase-to-phase voltage as the
working voltage for the protection fuse(s).
ELECTRIC FIELD EF-DETECTION
At any function, press the
EF
button for one second or more to
toggle to EF-Detection feature. The meter displays “E.F.” When it
is ready. Signal strength is indicated as a series of bar-graph
segments on the display plus variable beep tones.
—
Non-Contact EF-Detection :
An antenna is located along the
top of the meter, which detects electric field surrounds current-
carrying conductors. It is ideal for tracing live wiring connections,
locating wiring breakage and to distinguish between live or earth
connections.
—
Probe-Contact EF-Detection :
For more precise indication of
live wires, such as distinguishing between live and ground
connections, use the Red (+) test probe for direct contact
measurements.
