5. 3.5mm (1/8 inch) Headphone Jack: This is convenient for monitoring
using headphones. Depending on the software in use, you may either
monitor your own voice or playback of previously recorded tracks.
6. Low cut switch: Low cut mode is activated when the switch is pressed
in. Frequencies below 100Hz, such as wind noise and "breath pops," will
be reduced without significantly affecting voice frequencies.
7. -10 dB Switch: When pressed in, this will reduce the recording input
level by 10 decibels. For instance, if you were recording a loud signal
reaching 50dB, you could use this switch to reduce the recorded level to
40 dB and reduce or eliminate distortion or clipping.
Package Contents
1 KM-1U Microphone unit
1 Mounting Ring
1 USB cable (USB A Type plug to B Type plug)
1 Microphone Pouch
1 User's Manual
1 KURZWEIL Sticker
Features
• USB2.0 High Speed / Full Speed mode compatible
• ZERO latency monitoring of microphone signal
• Sampling accuracy up to 24 bits and sampling frequency up to 192 KHz
• Windows XP, Vista, Win7 / 8 / 10 and Mac compatible. Plug-and-Play
• Compatible with most recording software and ASIO audio drivers
Specifications
USB 2.0 High Speed and Full Speed compatible
24Bit A/D and D/A high speed conversion, up to 192kHz recording quality
Internal custom audio processing chip
Compatible with the latest USB audio devices
Sampling accuracy up to 24bits. Supports 44.1K, 48K, 96K, and 192K sample
rate
Pure gold plated 34mm (1-3/8 inch) pressure-gradient diaphragm
Polar pattern: Cardioid
Supports ASIO audio drivers
Frequency Response: 20Hz-20KHz
