Kurzweil Flash Play PC4, Руководство музыканта

Страница: 196 / 335

Multi Mode
Controllers
6-3
Controllers
In Multi Mode, you can use the PC4 physical controllers (the Knobs, Sliders, Buttons,
Wheels, and Pedals) to modify an instrument sound during a performance to add variation
or expression.
Move a controller to view the assigned parameter name and value for each Zone in the
display. Controllers can also be disabled or reassigned for each Zone in Multi Edit Mode.
Because of this, controllers may function differently for each Zone in each Multi.
Note: Parameter assignments may not be visible if the VIEW soft button has been pressed, or
the “Display” parameter in Global Mode has been changed.
CONTROL Section
In Factory Multis, the first 4 buttons and sliders are assigned to Zone On/Off and Zone
Volume. Sliders 8 and 9 typically control Delay and Reverb amount. The remaining buttons,
sliders and knobs are typically assigned to various effects and synthesis parameters.
TRANSPOSE Buttons
The TRANSPOSE buttons can be used to change the tuning of notes played on the PC4
keyboard in semitones (also known as half steps). This is a convenient way to change the key
of a song without learning to play it in a different key.
The current transpose amount is shown in the Display (for example, the default is “Xp:0st”).
Press both TRANSPOSE buttons simultaneously to reset the transposition to 0.
The TRANSPOSE buttons also transpose MIDI notes sent to the USB and MIDI Out ports.
PITCH WHEEL
Use the PITCH WHEEL to perform pitch bends. The Bend Up and Bend Down amount
can be adjusted for each Zone in Multi Edit Mode.
MODULATION WHEEL
In Factory Multis, the MODULATION WHEEL button will typically control a layer
volume or an effect amount. The name and value of the current assignment for each Zone
is shown in the Display when the wheel is moved. The assignment can be adjusted for each
Zone in Multi Edit Mode.