Kurtz Ersa EASY ARM 2, Руководство по эксплуатации

Страница: 18 / 30

18
3BA00217 • 2014-07-25 • Rev. 1 ersa EASY ARM 2
1.2 Warranty
The filters represent wearing parts which are not subject to warranty. Material or manufac -
turing defects must be indicated and accompanied by the return of goods, giving notice of the
defect as well as producing the purchase receipt, which must be confirmed, before returning
the goods.
The warranty time complies with the specifications of the applicable General Conditions
of Sale, Delivery and Payment of Ersa GmbH. Ersa GmbH can only assume a warranty if the
device is returned in the original packaging.
Any inappropriate use and tampering with the device shall void the warranty and liability
claims of the buyer against the manufacturer.
2. Technical data
EASY ARM 2
Dimensions (H x W x D) 470 mm x 255 mm x 490 mm
Weight 15 kg
Noise level 50 dB (A)
Volume flow rate per connection 110 m³/h (continuously/with a new filter)
Low pressure 1800 Pa
Filter class: F7 pre-filter (fleece)/H13 combination filter
Filtration efficiency (HEPA):
Pre-filter 1- 10 µm particles;
Combination filter < 1 µm particles
80 – 90 %;
99.95 %
Combination filter area 2.2 m²
Gas filter Activated carbon
Combination filter service life 1,500 h (in single-shift operation, hand soldering)
Electrical data 50 W, 100-240 V AC, 50/ 60 Hz
Fuse 6.3 A
Connections Interface to i-CON soldering stations or remote switch
Note on the filtering action:
Optimum gas filtering requires the following parameters:
Temperature of the process air in the gas filter: < 38 °C
Relative humidity: < 60 % RH
Boiling point of the substance: > 0 °C
Introduction/Technical Data