10
JAW REMOVAL
The Jaws on the PF 440 are easily removed. The following steps will help
you remove them for replacement or maintenance purposes.
1.
Loosen the spring plungers with a flat head screwdriver, to remove any
spring forces that may be pushing against the rear cover plate.
2.
Loosen and remove the two button head screws that attach the rear
cover plate to the movable jaw, using a 1/8 hex wrench.
3.
Slide the free jaw forward on the bed of the vise until it clears the beak
of the nut. Then lift the freed jaw off of the vise.
4.
Repeat the above process for the second jaw.
JAW REMOVAL
BUTTON HEAD SCREWS
ATTACH REAR COVER
TO JAW
SPRING PLUNGERS
TIGHTEN JAW TO NUT
