8
2
ENGLISH |
Table of Contents
Introduction .................................................................................................................3
Setup Instructions......................................................................................................4
Operating Instructions .........................................................................................5-7
DX6 Parts List ...............................................................................................................8
DX6 Mechanical Drawing........................................................................................9
Maintenance Schedule....................................................................................10-12
Troubleshooting Tips ............................................................................................. 13
Vise Data
Use this t
o fill out inf
ormation about your vise for quick reference.
Purchase Date:
_______ -_______- _______
Purchase Order:
_______________________
Purchased From: _______________________
Delivery Date:
_______________________
Serial No.:
_______________________
Note:
Make sure to register your warranty online at kurtworkholding.com
Table of Contents
CAUTION:
Is used when your action or lack of action may cause serious
injury.
OPERATING INSTRUCTIONS
SURFACE MOUNT
ING THE DTR20
T
he
DTR20 can be located and mounted using a slip fit 1/2 inch center
dowel pin and 3/8-16 socket head cap screws.
English Mounting:
The D
TR20
can be properly
located
using the
1/2" slip fit dowel
indicated by
M
in figure
4
above.
The DTR20 can be bolted down
using the 8 3/8-16 holes indicated in figure 4 above by L.
JAW POSITIONING
Fig.
5
Note:
Dimensions below are in inches unless specified.
The DTR20 has reversible jaws that allow for more part size variation. See the
below figure to see the two jaw configuration options and opening
capabilities.
