Kurgo Tru-Fit Smart Harness ENHANCED STRENGTH v.3 Скачать руководство пользователя страница 1

NOTICE: Please contact Kurgo directly with any product or warranty inquiries.

Kurgo Products • Salisbury, MA • USA • 877-847-3868 • www.kurgo.com

kurgo.com/product-instructions

11-17

Instructions and Care

Fitting the harness on your dog

1. Place upper neck straps (F) around pet’s head
2. Wrap two lower straps (D) around pet’s chest, behind front legs
3. Fasten Nesting Buckles (C) on both sides 
4. Adjust all straps to fit comfortably

Warning!

Do not use chest plate D-ring (G) or leash hitch (B) for securing in a vehicle. 
Replace harness if it shows signs of wear or has been in a crash situation.

Fastening the Nesting Buckles:

A

   Back Strap

B

  Leash Hitch

C

  Nesting Buckles™ 

D

  Lower Chest Straps    

E

  Padded Chest Plate 

F

  Upper Neck Straps

G

  Chest Plate D-ring 

 

FOR LEASH ONLY

Take a piece of the Nesting 
Buckle in each hand.

Pass the smaller piece 
through the wide slot of the 
larger piece. Kurgo logo 
should be pointing up.

Pull flat and snug the lower straps for a secure fit.

To use as a walking harness:

The Kurgo Tru-Fit Smart Harness™ is designed with the owner’s and dog’s 
walking needs in mind. The front chest plate provides a centrally located 
D-Ring for leash attachment, which helps deter your dog from pulling.

When your dog pulls, the force redirects them to one side or the other 
as you walk together. This sends them back in your direction and reduces 
pulling. The easy on-and-off design, and multiple adjustment points 
makes the Kurgo harness a great alternative to other training harnesses 
and collars.

For training purposes only, do not use with aggressive dogs.

To use as a vehicle seatbelt harness:

Securing your dog safely into the vehicle may be done in two ways.

A) Best Practice - to reduce excursion (pitching forward)

 

Attach the tether's carabiner through the top layer of the harness's 
back strap (A). Next, attach carabiner to buckled vehicle seatbelt, 
leaving tether loose.

B) Good Practice

 

Loop the tether handle around the seatbelt, passing back through 

itself. Next, clip the carabiner through the top layer of the harness's 
back strap (A). This set up allows for more movement for your dog.

Final Fit

All products displaying this symbol 
have been crash tested for dogs up to 
75lbs at an established university 
testing facility. They have been 
dynamically or sled tested using the 
Federal Motor Vehicle Safety (FMVSS) 
213 standards used for child restraint 
systems. Results may vary for dogs 
weighing more than 75lbs. 

Extra-small harness tested 

up to 10lbs

Small harness tested 

up to 25lbs

Medium harness tested 

up to 50lbs 

Large harness tested 

up to 75lbs

Extra-large harness tested 

up to 75lbs

TESTED

CRASH

This product

has been

Our product cleaning instructions will help ensure that your gear has a long, exciting life. Washing by 

hand and hang air-drying is the best way to care for your Kurgo products.

Hand Wash Instructions

1. Brush off loose dirt with a dry brush.
2. Spot clean with a damp sponge, cold water, and mild soap.  Avoid harsh detergents.
3. If necessary, rinse larger area to eliminate excess soap residue.
4. Hang to air dry (do not machine dry).

Cleaning Instructions

ENHANCED STRENGTH

v.3

Seatbelt tether and

carabiner

E

G

D

A

B

C

F

On front,

not shown

in diagram

A

B

Seatbelt

Best Practice

Good Practice

TESTED

CRASH

Crash tested

using this 

protocol

Seatbelt

Отзывы: