- 4 -
H3
11.8
12.4
24.3
25.7
Note: In the operation of the product, due to pressure drop, the actual
value will have a 0.3V error, which is normal.
Indicator light: The power indicator is red (compressor not works or
delays start); the power indicator is green (compressor works normally).
Eco/Max indicator is red (compressor works on fast cooling system).
Eco/Max indicator is green (energy saving mode).
4
）
Operation method:
The fridge applies electronic temperature control, and the control panel
is directly above cabinet, as shown in the following figure:
ON/OFF: connect to the power, press the ON/OFF button for 3s, then the
system will in the ready mode; press the ON/OFF button for 6s, then the
unit will run.
△
or
▽
: press the button
△
or
▽
to adjust target temperature. Press the
button
▽
to increase or the button
▽
to decrease the temperature.
5) Temperature compensation, battery protection level and centigrade
Fahrenheit switching
In ready mode, press the SET button for 3s, you can setup parameter, the
screen will show E1 and press the SET button again. You can chose the
difference mode from E1 to E8. Press the Δ or
∇
button can show the
parameter , you can adjust or save the data. If you don’t press any button
for 3s, the unit will return to normal operation.