11
ENG
Index
Page
Description of the appliance
11
Instructions for use
11
Cleaning and maintenance 12
Problem solving 12
Sizes and specifications
12
Accessories supplied
13
Installation
13
Active charcoal filters
13
A
An electronic programmer device with
TOUCH CONTROL technology to control
speed, light, programming and power
indicators in use as well as filter saturation.
B
Metal filters.
C
Light.
You can activate or deactivate the cooker hood by
operating the functions shown in the diagram.
Switch on the extractor fan a few minutes before
you start to cook in order to ensure that a steady air
flow has been established before fumes appear.
Allow the extractor fan to run for several minutes
after you have finished cooking (between 3 to 5
minutes) in order to expel all the grease from the
outlet duct. This prevents the return of grease,
smoke and smells.
•
Proceed as follows:
1)
•
Turn the kitchen hood on and choose the
required speed.
2)
•
Press "timer". Speed indicators 1, 2 and 3 will
start to flash.
3)
•
Choose the required time by pressing
" + + + or
- - - "
. There is a 10-minute interval between
each stage. Level 1 (minimum): 10 minutes;
level 3 (maximum):30 minutes.
4)
•
After having selected the working time, press
"timer" again to save the setting. The indicator of
the selected speed will start to flash.
5)
•
The kitchen hood will switch itself off after the
specified time.
•
The maximum speed ‘H’ can only be selected
manually and will be automatically changed to
the second speed level after approximately 10
minutes.
Clean the filters when the filter saturation
indicator lights up. (See page 12, filter cleaning).
•
After cleaning the filters, and with the hood
turned off, simultaneously press
" + + + and - - -
"
for 3 seconds to switch off the indicator.
Description of the appliance
Instructions for use
Programming the timer
Filter saturation indicator “F”
Minimum speed
Medium speed
Maximum speed
Extra fan
Filter saturation
ind.
Timer
Reduce speed
Increase speed
On-Off
Light
