ENGLISH
31
b) Hinges
To mount the hinges it is necessary to drill two holes
(dia. 35 mm, depth 14 mm) on the inner side of the
door. The distance between the holes hobs fixing
centres must be 416 mm.
The distance (B) from upper edge of the door to the
centre of the hole depends on the adjacent
furniture's dimensions.
The required dimensions are given in the picture
C
.
The hinges will be fixed to the door by means of
screws for wood (2-Fig.
B
).
c) Mounting the door
Fix the hinges (1) to the machine by means of the
M5x9 screws (3-Fig.
B
). The hinges can be adjusted
to compensate for possible uneven thickness of the
door.
To align the door perfectly it is necessary to loosen
the screw (3-Fig.
B
), adjust the door and tighten the
screw again.
d) Counter-magnet (6)
The appliance is pre-arranged for a magnetic closure
of the door. To enable a correct operation of this
device, it is necessary to screw the counter-magnet
(6) (steel disk + rubber ring) into the inner side of the
door.
Its position must correspond to the magnet (4) on the
appliance (see picture
D
).
6
4
D
16-22
B
C
22+1,5
595-598
416
C
6
35 Ø 14 depth
If the door has to be opened from left to right, invert
the position of the plates (7), the magnet (4) and the
plate (5) (Fig.
B
and
E
). Mount the countermagnet
(6) and the hinges (1) as previously described.
4
6
5
1
2
3
7
E
132995090.qxd 11/7/01 12:06 PM Pagina 31 (Nero/Process Black pellicola)
