Küppersbusch IKE326-0-2T-CN Скачать руководство пользователя

Страница: 8 / 16

Problem

Possible cause

Solution

The door has been opened too
frequently.

Do not keep the door open longer
than necessary.

The product temperature is too
high.

Let the product temperature de-
crease to room temperature before
storage.

The room temperature is too
high.

Decrease the room temperature.

Water flows on the rear
plate of the refrigerator.

During the automatic defrosting
process, frost defrosts on the rear
plate.

This is correct.

Water flows into the re-
frigerator.

The water outlet is clogged.

Clean the water outlet.

Products prevent that water flows
into the water collector.

Make sure that products do not
touch the rear plate.

Water flows on the
ground.

The melting water outlet does not
flow in the evaporative tray above
the compressor.

Attach the melting water outlet to
the evaporative tray.

The temperature in the
appliance is too low.

The temperature regulator is not
set correctly.

Set a higher temperature.

The temperature in the
appliance is too high.

The temperature regulator is not
set correctly.

Set a lower temperature.

The door is not closed correctly.

Refer to "Closing the door".

The product temperature is too
high.

Let the product temperature de-
crease to room temperature before
storage.

Many products are stored at the
same time.

Store less products at the same
time.

The temperature in the re-
frigerator is too high.

There is no cold air circulation in
the appliance.

Make sure that there is cold air cir-
culation in the appliance.

The temperature in the
freezer is too high.

Products are too near to each
other.

Store products so that there is cold
air circulation.

There is too much frost.

Food is not wrapped correctly.

Wrap the food correctly.

The door is not closed correctly.

Refer to "Closing the door".

The temperature regulator is not
set correctly.

Set a higher temperature.

Replacing the lamp

1. Disconnect the mains plug from the

mains socket.

2. Remove the screw from the lamp cover.
3. Remove the lamp cover (refer to the illus-

tration).

4. Replace the used lamp with a new lamp

of the same power and specifically de-
signed for household appliances. (the
maximum power is shown on the lamp
cover).

5. Install the lamp cover.
6. Tighten the screw to the lamp cover.

7. Connect the mains plug to the mains

socket.

8. Open the door. Make sure that the lamp

comes on.

Содержание IKE326-0-2T-CN

















Результаты поиска

Содержание IKE326-0-2T-CN

Отзывы:

Похожие инструкции для IKE326-0-2T-CN

Бренды по названию

Популярные бренды

Küppersbusch IKE326-0-2T-CN, Руководство пользователя

Результаты поиска

Содержание IKE326-0-2T-CN

Отзывы:

Похожие инструкции для IKE326-0-2T-CN

Бренды по названию

Популярные бренды