GB
23
Electrical connection
Before plugging in, ensure that the voltage and frequen-
cy shown on the serial number plate correspond to your
domestic power supply.
Voltage can vary by ±6% of the rated voltage.
For operation with different voltages, a suitably sized
auto-transformer must be used.
Important
The appliance must be earthed.
The power supply cable plug is provided with a contact
for this purpose.
If the domestic power supply socket is not earthed. con-
nect the appliance to a separate earth in compliance with
current regulations, consulting a specialist technician.
The Manufacturer declines all responsibility if the
above safety precautions are not observed.
This appliance complies with the following E.E.C.
Directives:
-
87/308 EEC of 2/6/87 relative to radio interference
suppression.
-
73/23 EEC of 19.2.73 (Low Voltage Directive) and
subsequent modifications.
-
89/336 EEC of 3.5.89
(Electromagnetic Compatibility Directive) and subsequent
modifications.
Attention!
It must be possible to disconnect the appliance from the
mains power supply; the plug must therefore be easily
accessible after installation.
Building-in
Dimensioned drawing
See "Installation Instructions"
Please check whether, after installing your appliance and
especially after reversing the door, the door seal seals
right round. A badly fitting door seal may lead to heavy
frosting and thereby to a higher power consumption.
