17
GB
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Electrical connection
• Take
the two parts of the connection box from the packing (3).
• Fasten
the two connectors together, and insert them into the connection box. (
Fig.7
)
• Close
the electrical connection box using 4 screws size 2.9x12.7 provided in bag (3).
• Fasten
the electrical connection box to the hood canopy support using 2 screws size
2.9x6.5 provided in bag (3).
• Replace
the metal grease filters (see paragraph on
Maintenance
).
• Once the hood has been connected to the mains,
check
that the lighting, motor and
speed change are all working correctly.
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
OPERATION
Safety warnings
• Before carring out any kind of maintenance or cleaning, disconnect the hood from the
mains supply.
• The grease filters and the charcoal filter should be cleaned or replaced as recommended
by the manufacturer or more frequently if the hood is used consistently over 4 hours
per day.
• When using a gas hob in connection with the cooker hood never leave the burners of
the hob uncovered while the hood is in use or when the pans have been removed.
Switch off the gas before removing the pan, or for just short periods and never leave
the hob unattended.
• Always ensure that the flame is kept at the correct intensity to prevent the flame from
licking round from the bottom of the pan; this will save energy and will avoid a
dangerous concentration of heat.
• Always ensure that the appliance is used in accordance with the manufacturer’s
instructions for the removal of contaminated air and odours during cooking.
Instruction for Use
Control panel (Fig.8)
Key
T1
=
Turns the lighting system on and off
Key
T2
=
Turns the motor on and off
Key
T3
=
Decreases the working speed
Key
T4
=
Increases the working speed
Key
T5
=
Intensive speed with timed stoppage. Suitable to deal with maximum
vapour emission, this turns off automatically 10 minutes after starting
operation. It can be disabled by pressing the key
T5
.
All manuals and user guides at all-guides.com
