background image

20

D037

Unplug the appliance before carrying out
any maintenance operation.

Warning

This appliance contains hydrocarbons in its

cooling unit maintenance and recharging
must therefore only be carried out by
authorised technicians.

Defrosting

Frost is automatically eliminated from the evaporator
of the refrigerator compartment every time the motor
compressor stops, during normal use.
The defrost water drains out through a trough into a
special container at the back of the appliance, over the
motor compressor, where it evaporates.

It is important to periodically clean the defrost
water drain hole in the middle of the refrigerator
compartment channel to prevent the water
overflowing and dripping onto the food inside. Use
the special cleaner provided, which you will find
already inserted into the drain hole.

The freezer compartment, however, will become
progressively covered with frost. This should be
removed with the special plastic scraper provided,
whenever the thickness of the frost exceeds 4 mm.
During this operation it is not necessary to switch off
the power supply or to remove the foodstuffs.

However, when the ice becomes very thick on the
inner liner, complete defrosting should be carried out
as follows:

1. pull out the plug from the wall socket or turn the

thermostat knob to the «O» setting;

2. remove any stored food, wrap it in several layers of

newspaper and put it in a cool place;

3. leave the door open, place a basin on the top shelf

of the refrigerator compartment, under the drain
hole, remove the plug as shown in the figure;

4. when defrosting is completed, dry the interior

thoroughly and refit the plug.

5. Keep the scraper for future use.
6. Turn the thermostat knob back to the required

setting or replace the plug in the power socket. 

7. After two or three hours, reload the previously

removed food into the compartment.

MAINTENANCE

PR151

Important

Never use sharp metal tools to scrape off
frost from the evaporator as you could
damage it.
Do not use a mechanical device or any
artificial means to speed up the thawing
process other than those recommended
by the manufacturer.

A temperature rise of the frozen food
packs, during defrosting, may shorten
their safe storage life.

Содержание FKE 157-6













Отзывы: