4
Installation instructions EEB 9600.0
Options for mounting under a countertop
Option 1: in a cupboard on a board.
Option 2: between two cupboards on a se-
cured board.
Boards (approximately 19 mm/ 3/4" thick)
must be attached to the adjacent cabinets
on the right and left, so the oven can be
clipped in at the sides.
The following KÜPPERSBUSCH built-in cooktops may be installed above the
oven:
F
* The gap between the countertop and the front panel is not necessary
for the models EGS 304.2 and EKS 304.1.
We recommend you to place the gap directly below the countertop, be-
cause it’s not so visible if it is between the oven an the front panel.
F
Look for the recess size and installation specifics for the cooktop in the
installation instructions for the cooktop.
Installation under the
Cook-Center KC 906.2 E
The oven must be positioned between
two cabinets on a secured shelf. Shel-
ves (approximately 19mm/
9/16" thick) must be attached to the
adjacent cabinets on both sides so the
oven can be clipped in at the sides.
Please review the installation instruc-
tions for the model KC 906.2 for the
position of the Cook-Center.
Be sure to install a stain-
less steel filler panel (acc.
No. 454) between the
Cook-Center and the oven.
The stainless steel filler
panel is required and sold
separately.
Model:
„A“
„B“
„C“
EKE 854.1
EKE 854.2
EKE 804.2
EKE 604.2
30
-5
0
mm
1
-1/
8 t
o 2
"
103 mm
4-1/16"
≥
103 mm
≥
4-1/16"
EGS 304.0*
97 mm
3-13/16"
≥
97 mm
≥
3-13/16"
EKS 304.1*
85 mm
3-3/8"
≥
85 mm
≥
3-3/8"
EKS 604.2
EKS 804.2
103 mm
4-1/16"
≥
103 mm
≥
4-1/16"