Küppersbusch EDIP 6600 Скачать руководство пользователя страница 10

26

Cleaning and care

Isolate the extractor hood by pulling out
the mains plug or switching off the fuse.

When cleaning the grease filters, remove
grease deposits from accessible parts of
the housing. This prevents the risk of fire
and ensures that the extractor hood
continues operating at maximum 
efficiency.

Clean the extractor hood with a hot soap
solution or a mild window cleaner.

Do not scrape off dried-on dirt but wipe
off with a damp cloth.

Do not use scouring agents or abrasive
sponges.

Note: 

Do not use alcohol (spirit) on 

plastic surfaces, as dull marks may
appear.

Caution: 

Ensure that the kitchen is ade-

quately ventilated. Avoid naked flames!

Clean the operating buttons with a mild

soapy solution and a soft, damp cloth only.
Do not use stainless-steel cleaner to clean
the operating buttons.

Stainless steel surfaces:

Use a mild non-abrasive stainless steel
cleaner.

Clean the surface in the same direction
as it has been ground and polished.

Do not use any of the following to clean

stainless steel surfaces: abrasive sponges,
cleaning agents containing sand, soda, acid
or chloride!

Aluminium and plastic surfaces:

Use a soft, non-linting window cloth or
micro-fibre cloth.

Do not use dry cloths.

Use a mild window cleaning agent.

Do not use aggressive, acidic or caustic
cleaners.

Do not use abrasive agents.

4.

Re-insert the bulb ring.

5.

Restore the power by inserting the mains
plug or switching on the fuse.

Note: I

f the light does not function, check

that the bulbs have been inserted correctly.

Replacing the light bulbs

1.

Switch off the extractor hood and pull
out the mains plug or switch off the
electricity supply at the fuse box.

When switched on, the halogen bulbs

become very hot. Even for some time after
the bulbs have been switched off there is
still a risk of burns.

2.

Remove the bulb ring with a screwdriver
or similar tool.

3.

Replace the halogen light bulb 
(conventional halogen bulb, 12 Volt,
max. 20 Watt, G4 bulbholder).

Caution:

Plug-in bulbholder.

Take hold of the bulb with a clean cloth.

Содержание EDIP 6600




















Отзывы: