29
For internal use only
Preparation and descling
1.
Remove the water filter.
2.
Fill in the antiliming agent in accordance with the producer's instructions and
dilute it with at least 1l of water. The descaling cycle will not run properly if
this is not done.
3.
Replace the water tank.
4.
Place a large vessel under the coffee dispenser and press button
for
5 seconds.
5.
Press button
lightly and confirm with YES, then press button
P.
The descaling process will commence.
Descaling cycles will take a minute each until «rinse appliance – press the
water button» appears in the display.
Rinsing
1.
Rinse the water tank thoroughly and fill it up with fresh water.
2.
Press button
P
in order to start the rinsing cycle.
Button
can be used to interrupt and recommence the cycle.
The rinsing process will have been completed when the clear text display
indicates «rinsing completed – press water button.»
3.
Press button
.
Completing the descaling cycle
1.
Rinse the water tank thoroughly and fill it up with fresh water.
2.
Replace the water filter.
3.
Replace the filled water tank.
4.
Press button
in order to start the ventilation cycle.
5.
Allow hot water to flow until you have a regular stream of water.
6.
Press button
in order to complete the ventilation cycle.
