Kuppersbusch ITE1370-2, Руководство пользователя

Страница: 18 / 60

• Connect to potable water supply only (If a
water connection is foreseen).
Service
• Any electrical work required to do the
servicing of the appliance should be car-
ried out by a qualified electrician or com-
petent person.
• This product must be serviced by an au-
thorized Service Centre, and only genu-
ine spare parts must be used.
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer,
in either its refrigerant circuit or insula-
tion materials. The appliance shall not
be discarded together with the urban
refuse and rubbish. The insulation foam
contains flammable gases: the appli-
ance shall be disposed according to
the applicable regulations to obtain
from your local authorities. Avoid dam-
aging the cooling unit, especially at the
rear near the heat exchanger. The ma-
terials used on this appliance marked
by the symbol
are recyclable.
CONTROL PANEL
Functions
1 2
3 4 5 6
1
ON/OFF button
2
Display
3
Temperature warmer button
4
Temperature colder button
5
OK button
6
Functions button
It is possible to change predefined sound of
buttons to a loudly one by pressing togeth-
er Functions button and Temperature cold-
er button for some seconds. Change is re-
versible.
Display
1 6 3 4 5 2
1
Timer function
2
Drinks Chill function
3
Fast Freeze function
4
Child Lock function
5
Alarm indicator
6
Temperature indicator
Switching on
To switch on the appliance do these steps:
1. Connect the mains plug to the power
socket.
2. Press the ON/OFF button if the display
is off.
3. The alarm buzzer may sound after a
few seconds.
To reset the alarm refer to "Door open
alarm".
If “DEMO” appears on the Display, the
appliance is in demonstration mode: re-
fer to “Troubleshooting” paragraph.
4.
The temperature indicators show the
set default temperature.
18