Kuppersbusch IKDU 9900.0PW, Инструкция по установке и эксплуатации

Страница: 2 / 10

Important notes
Miscellaneous
This installation instruction contains important information, read it carefully and follow any
instructions. This will prevent failure caused by wrong use and/or installation. Keep this
manual for possible later use. Follow the instructions from the manufacturer of the cooking
equipment for the installation of hoods. Install this hood with at least two people. Replace
defective parts only with original spare parts from the manufacturer.
If you have bought a cooker hood with an external motor then you will find more
information in the manual for the motor which is to be found in the package.
Safety requirements
Please note that the installation should only be done by a professional as he has the
knowledge about the air duct and the electrical connection. Make sure that the wall or
ceiling is suitable for the weight of the cooker hood. For fixing the cooker hood please use
the enclosed plugs. Depending on the surface the plugs (8mm) are having the following
bearing capacities:
brick 5,2 kN
concrete 9,4 kN
lime sand brick 4,8 kN
If you need to fix your cooker hood on other surfaces please ask a professional.
Risk of injury
During manufacturing of the extractor, sharp edges can be formed. Therefore always wear
gloves during installation.
Danger of electric shock
Voltage must match the voltage marked on the ratings plate. This plate can be found under
the grease filter. This appliance should be connected to a grounded system. The electrical
connection must be easily accessible after installation.
Before any maintenance or repair the power supply must be disconnected!
Air outlet
The air should not be discharged into a chimney which is also used for the removal of
exhaust gases from equipment working on fuel (including gas). Take into account the rules
for air outlet. Prepare electrical connection and ducting, that way the hood can easily be
connected. Avoid sharp bends and kinks in the drain hose.