225007
21
1.
Operations
1.1 Your new hob with Touch-Control operation
This manual covers the models: .GKST 60.
1.2 Touch-Control operating panel
After the supply voltage has been applied (mains connection), a self-test of the control unit (calibration adjustment)
is then carried out. Afterwards, the control unit is then in standby mode.
The touch keys may not be covered by objects or anything else during calibration.
On/off key (control))
Locking key
Locking control point (control)
Minus key
Plus key
Cooking zone key
Cooking level display
Additional multi-circuit control lamp
!
Timer key
"
Timer display
#
Control point for cooking zone
1.3 Touch-Control operations
Pressing the ON/OFF key
switches on the control system. The next action must be carried out within
10
seconds
, otherwise the control system will automatically switch off again.
To switch on a cooking zone, press the corresponding cooking zone key
of the required cooking zone.
Select a cooking level from 1 to -9 by means of the minus or plus keys
/
. When switched on, each cooking
zone can be switched off again at any time. To do this, the required cooking zone must be activated.
The minus key
can be used to turn the cooking level down to
“0”
; if the minus and plus keys
/
are pressed
at the same time, the cooking level can be switched off directly.
In all cases the complete control system can be switched off at any time by pressing the ON/OFF key
.