background image

3

SAFE GUARD INSTRUCTIONS

1) SAFE GUARD INSTRUCTIONS

For all appliances:

- the product shall be installed according with the a statement that the installation must conform with local

codes or, in absence of local codes, with the 

National Fuel Gas Code, ANSI Z223.1/NFPA 54.

- The product must be electrically grounded in accordance with local codes or, in the absence of local

codes, with the 

National Electrical Code, ANSI/NFPA 70.

- The appliance and its individual shutoff valve must be disconnected from the gas supply piping system

during any pressure testing of that system at test pressure in excess of  ½  psi (3.5 kPa). The maximun

gas supply pressure is 4 inch WC and 11 inch WC and the gas pressure regulator provided is regulated

to 1 inch water column above the manufacturer’s specified manihold pressure.

- Always disconnect all cord connect appliances shall include instructions relative to location ot the wall

receptacle and the warning to the user to disconnect the electrical supply before servicing the

appliance. 

- Save the orifices removed from the appliance for  future use.

- When a flexible service cord of the grounding type is provided to connect the appliance to a line-voltage

electrical supply, the instructions shall also include the intent of the warning statement specified in

1.29.12.

- The maximum depth cabinets  installed above cooking tops be 13 in. (330 mm).

- Keeping appliance area clear and free from combustible materials, gasoline, and other flammable vapors

and liquids.

- Not obstructing the flow combustion and  ventilation air.

WARNING:  If the information on this manual is not followed

exactly, a fire or explosion may result causing property

damage, personal injury or death.

-  Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any

other appliance.

-  WHAT TO DO IF YOU SMELL GAS

-  Do not try to light any appliance.

-  Do not touch any electrical switch; do not use any phone in your building.

-  Immediately call your gas supplier from a neighbor’s phone.  

Follow the gas supplier’s instructions.

-  If you cannot reach your gas supplier, call the fire department.

-  Installation and service must be performed by a qualified installer; service agency or the

gas supplier.

Содержание GKS 3720.0 M-UL




















Отзывы: