Kuppersbusch EMWK 1050.1E-US, Инструкция по эксплуатации, Страница: 25 / 48

23
USA
When the oven is working...
Interrupting a cooking cycle
You can stop the cooking process at any time
by pressing the
Stop key once or by opening
the oven door.
In both cases:
Microwave emission is stopped
immediately.
The grill is de-activated but is still very hot.
Danger of burning!
The timer stops and the display shows the
remaining amount of operating time.
If you wish, at this time you can:
1. Turn or stir the food to ensure it will be
evenly cooked.
2. Change the process parameters.
3. Cancel the process by pressing the Stop
key.
To restart the process, close the door and
press the
Start key
Altering parameters
The operating parameters (time, weight,
power, etc.) can be altered when the oven is
operating or when the cooking process has
been interrupted by proceeding as follows:
1. To alter the time, press key
“
-
” and “
+
”.
The new time defined is immediately
valid.
2. To alter the power, press the Power
Selection key. The display and respective
light start to flash. Alter the parameter by
pressing the
“
-
” and “
+
” keys and confirm
by pressing the Power Selection key
again.
Cancelling a cooking cycle
If you wish to cancel the cooking process,
press the
Stop key for 3 seconds.
You will then hear a beep and the time will
appear on the
display .
End of a cooking cycle
At the end of the process you will hear three
beeps and the display will show the word
“
End
”.
The beeps are repeated every 30 seconds
until the door is opened or the
Stop key is
pressed.