Kuppersbusch EKE 6642.0M Скачать руководство пользователя

Страница: 14 / 15

Assembly instructions

Clips

• Drive the clips into the worktop cut-out at

the intervals indicated. It is not necessary
to adjust the height due to the horizontal
stop.

• Important! The horizontal drive of the clips

must be flush with the worktop (avoid the
risk of fractures).

• Position the hob according to the

illustration on the left side (a), align it (b)
and insert the clips (c).

• Screws may be used to fasten the clips.

Important!
There is a risk of breakage if the hob is
canted or subjected to stress during
installation!

Minimum distance to adjacent walls
Cut-out dimension
Outer dimensions of the hob
Cable routing in rear wall
Installation height

Bracket

• Insert the hob and align it.
• From the bottom, insert the brackets with

screws in the holes provided for fastening
the brackets, align the brackets and screw
them tight.

• Tighten the screws with a hand screw

driver only; do not use a battery-operated
screw driver.

• In the case of thin worktops make sure

that the brackets are correctly positioned.

Important:
There is a risk of breakage if the hob is
canted or subjected to stress during
installation!

Minimum distance to adjacent walls
Cut-out dimension
Outer dimensions of the hob
Cable routing in rear wall
Installation height

Dimensions in mm

Содержание EKE 6642.0M
















Результаты поиска

Содержание EKE 6642.0M

Отзывы:

Похожие инструкции для EKE 6642.0M

Бренды по названию

Популярные бренды

Kuppersbusch EKE 6642.0M, Инструкция по использованию и монтажу

Результаты поиска

Содержание EKE 6642.0M

Отзывы:

Похожие инструкции для EKE 6642.0M

Бренды по названию

Популярные бренды