Kuppersbusch CD6350.0, Инструкция по эксплуатации

Страница: 8 / 52

Safety Instructions and Warnings
8
User's guide
Check consignment
Transport the appliance to a suitable place and remove it from its packaging there. The appliance may only
be assembled and installed by an electrician who complies with the respective speci
fi cations.
Check to ensure that the consignment is complete.
□ Check the appliance for any transport damage.
□ Contact our Customer Service if the consignment is incomplete or if the appliance shows any transport
damage.
CAUTION!
Never put a damaged appliance into operation!
2. Safety Instructions and Warnings
2.1. For connection and operation
□ Only KÜPPERSBUSCH appliances have been manufactured and tested for use
under a KÜPPERSBUSCH hob. Do not use other hobs.
□ Any handling or repair to the appliance, including replacement of the power cable,
should be carried out by authorised Technical Service Personnel using original
spare parts. Repairs or handling by others may damage the appliance or cause
malfunctioning that could be hazardous to your safety.
□ Statutory regulations and the connection speci fi cations issued by the local power
supply company must be strictly observed.
□ The power supply to the appliance must be disconnected when the lamp is connected,
repaired or replaced. Disconnect the fuse or pull out the power plug.
□ Installation must guarantee full safety against any potential contact.
□ Changing the installation location of a plug and replacing the mains cable may only
be carried out by an electrician who complies with the respective speci fi cations.
□ It is essential for the connection data (frequency and voltage) of the appliance to
comply with that of the mains electricity supply in order for the appliance not to be
damaged. Compare this data when connecting the appliance. If in any doubt, ask a
quali fi ed electrician.