
Safety Instructions and Warnings for connection and operation
8
User's guide
Check consignment
Transport the oven to a suitable place and remove it from its packaging there. The oven may only be
assembled and installed by an electrician who complies with the respective speci
fi
cations.
Check to ensure that the consignment is complete.
□
Check the oven for any transport damage.
□
Contact our Customer Service if the consignment is incomplete or if the oven shows
any transport damage.
CAUTION!
Never put a damaged appliance into operation!
2. Safety Instructions and Warnings for connection and
operation
2.1. For connection and operation
□
Only KÜPPERSBUSCH ovens have been manufactured and tested for use under a
KÜPPERSBUSCH hob. Do not use other hobs.
□
Any handling or repair to the appliance, including replacement of the power cable,
should be carried out by authorised Technical Service Personnel using original spare
parts. Repairs or handling by others may damage the appliance or cause malfunc-
tioning that could be hazardous to your safety.
□
Statutory regulations and the connection speci
fi
cations issued by the local power
supply company must be strictly observed.
□
The power supply to the appliance must be disconnected when the oven lamp is
connected, repaired or replaced. Disconnect the fuse or pull out the power plug.
□
Installation must guarantee full safety against any potential contact.
□
Changing the installation location of a plug and replacing the mains cable may only
be carried out by an electrician who complies with the respective speci
fi
cations.
□
It is essential for the connection data (frequency and voltage) of the oven to comply
with that of the mains electricity supply in order for the oven not to be damaged. Com-
pare this data when connecting the oven. If in any doubt, ask a quali
fi
ed electrician.
Содержание CBM 6550.0
Страница 3: ...User s guide 3...