Kuppersberg OZ 969, Быстрый старт, Страница: 20 / 23

ENGLISH
21
Preset programmes
1. Meat
• pork
• beef
• veal
• lamb
2. Poultry
• chicken
• duck
• goose
• turkey
3. Pizza
• thin base
• thick base
• frozen
4. Frozen products
• fi sh
• lasagne
• chips
5. Pastries
• crumble cake
• fruitcake
• sponge cake
• bread
6. Other functions
• dough proving
• keeping food warm
Menu / user programs
Select user program menu and touch . 6 fully
customizable user programs are available.
Operating user programs
Using
navigation sensor
fi elds select a
user program such as P1 and touch to con fi rm
your selection. The appliance display will show
the default settings for all P1-P6 user programs,
which are the same as those shown below:
conventional cooking, temperature 180°C and
cook time 00:30.
If no changes are made within 3 minutes, the
appliance switches to standby mode.
Place food in the open, close the door and
touch
sensor fi eld to start the program. The
program is started. In lower box of the preset
program COOK TIME changes to END TIME and
consequently cook time of 30 min is replaced
with end time and the remaining time is shown
on the progress bar.
Once the programmed cook time has elapsed, all
functions except cooling fan are turned off (see:
Cooling fan operation) and an acoustic signal is
sounded (2 beeps / pause / 2 beeps).
The sequence is repeated for about 1,5 minutes.
The display shows the temperature set for the
oven chamber and END TIME and symbol is
fl ashing.
Touch , to acknowledge and mute the acoustic
signal. After this, the appliance switches to
standby mode.
Editing user program settings
To modify the heating function and COOK TIME,
pressing the EDIT tab using the buttons and
con
fi rming the choice by pressing . Function
name and symbol start fl ashing in central box.
If no changes are made within 3 minutes, the
appliance exits to upper menu (User Programs)
and stores settings last shown on the display.
Only changes con
fi rmed by touching are
updated.
Touch
navigation sensor
fi elds to change
the heating function. Available heating functions
are described in section Menu \ Heating
functions.
Select the desired function and touch
sensor
fi eld to con fi rm. After touching the sensor
fi eld, heating function symbol and name stop
fl ashing in central box. At the same time
symbol start fl ashing and it is possible to modify
the temperature.
If no changes are made within 3 minutes, the
appliance exits to upper menu (User Programs)
and stores settings last shown on the display.
Only changes con
fi rmed by touching are
updated.