Kuppersberg FQ663, Технический паспорт

Страница: 12 / 16

12
TEchnical passporT English
gas hob
levels, it should not be realized between
maximum and off positions. To close the
burner turn the switch clockwise till to
reach “off” position.
MODELS EQUIPPED WITH
LIGHTER SWITCH (Automatic
ignition)
In order to burn one of the burners,
press the switch down and bring the
switch to maximum position. When it
burns, fl ame is adjusted to the desired
intensity with the switch.
Figure 6.
RIGHT WRONG
Â
In order that the hob will
operate properly the grills and burner
components should be properly
positioned.(Figure 6)
Â
Make sure that the fl ame of your
burner is in blue color and work quietly.
If the burner will burn in yellow color
or work with voice make sure that all
burners fi t properly. If the fl ame color
does not change to blue color then
apply the authorized service.
7. CONTROLLER TYPES
AND USE
7.1. CONTROL PANEL
1. Left front burner control switch
2. Left rear burner control switch
3. Right rear hot-plate control switch
4. Right front burner control switch
7.2. BASIC SETTINGS
7.2.1. FOR GAS BURNERS
Operation of the burners and power levels
Turn the control switch left-wise
until reaching to maximum level. When
you press the control switch all burning
igniters will have fl ame to burn. Release
the switch in few seconds after burning
of the burner, and bring the control switch
to the desired fl ame position between the
maximum and minimum levels.
If the fl ame is gone when you release
the switch You should repeat the above
process. But this time press the switch
and hold for about 10 seconds.
WARNING:
Do not use burning
system more than 15 seconds. If the
burner will not be burned within such
time or if the fl ame will be cut for any
reason whatsoever, repeat burning
process after waiting for 1 minute.