Kuppersberg FQ 601, Технический паспорт

Страница: 10 / 48

10
TECHNICAL PASSPORT ENGLISH
Gas hob
Caution
Â
НIt is not recommended to use
roasting pans,frying pans or grill stones
heated simultaneously on several
burners because the resulting heat
build-up may damage the appliance.
Â
Do not touch the top plate and
trivet whilst in use for a certain period
after use.
Must Do
Â
As soon as a liquid starts
boiling, turn down the flame so that it
will barely keep the liquid simmering.
CLEANING AND
MAINTENANCE
Caution
Â
Cleaning operations must only
be carried out when the appliance is
completely cool.
Â
The appliance should be
disconnected from your mains supply
before commencing any cleaning
process.
Â
Clean the appliance regularly
preferably after each use.
Â
Abrasive cleaners or sharp
objects will damage the appliance
surface; you should clean it using water
and a httie washing up liquid.
USABLE
1. Soft cloth
2. Neutral Detergent
UNUSABLE
1. Nylon Brush
2. Edible Oil
3. Abrasive
4. Metal Brush
5. Acidic / Alkali Detergent
6. Thinner /Benzene
Pan support, contra handles
Â
Take off the Pan support.
Â
Clean these and the control
handles with a damp cloth, washing
up liquid and warm water For smbbon
soiling, soak beforehand.
Â
Dry everything with a clean
soft cloth.
Top plate
Â
Regularly wipe over the top
plate using a soil cloth well wrung-oul
in warm water to which a little washing
up liquid has been added.
Â
Dry the top plate thoroughly
aiier cleaning.
Â
Thoroughly remove saltyfoods
or liquids from the hub as soon as
possible to avoid the risk of corrosion.
Â
Stainless steel parts of the
appliance may become discoloured over
time This is normal because of the high
temperatures Each time the appliance is
used these parts should be cleaned with a
product that is suitable for stainless steel.
Burners
Â
Remove the burner lids and
Flame Spreaders by pulling them
upwards and away from the top plate.
Â
Soak them in hot water and a
little detergent or washing up liqui.
Â
After cleaning and washing them,
wipe and dry them carefully. Make sure that
the flame holes are clean and completely dry.
Â
Wipe the fixed parts of the burner
cup with a damp cloth and dry afterwards.
Â
Gently wipe the ignition device
and flame supervision device with a
well wrung-out cloth and wipe dry with
a clean cloth.
Â
Before placing the burners
back on the top plate, make sure that
the injector is not blocked.