Kuppersberg FG 63, Технический паспорт, Страница: 8 / 52

8
TECHNICAL PASSPORT ENGLISH
Gas hob
Figure 3 Figure 4
Figure 1 Figure 2
UPPER TRAY
SILICONE SEAL
WORKTOP SURFACE
CONNECTION CLIP
SCREW
INSTALLATION OF THE BUILT
-IN COOKER 400 SERIES
Worktop cutting measure is given in Figure 7 for placing the cooker. Into the
worktop cut to these measures, place the cooker of which the initial preparations
were performed.
If you will use the cooker on the built-in oven, then comply with the Figures
8 and 9 for proper clearance between the oven and cooker to allow air circulation.
Please place the silicone seal along the edges of the cooker (Figure 1). Finally,
you. should fix it on the lower edges of the work surface by means of clamps and
screws (Figure 2).