8
TECHNICAL PASSPORT
ENGLISH
Electric Hob
Deactivating the Stop
function
1 Press the Stop touch button
(10) and then any other, except
the off button (2). The cooking
process will resume with the same
power levels and set as previously.
You must press the second
touch button within 10 seconds or
the function will be deactivated.
The appliance will switch off if the
cooking process is not resumed after
a ten minute pause.
Function to keep a pan hot
You can use this function to keep
food hot in a pan on the cooking
surface.
1 There is a pan on one of the
hot plates with a previously set
cooking level.
2 Press the touch button (4)
and keep it pressed down until the
cooking level lowers to . This is an
intermediate level between
0
and
1
.
To disconnect this function, just
press the minus button (4) until
it reaches
0
. This function will only
work for a maximum of 120 minutes,
after which the appliance will switch
off.
Safety switch off function
If due to an error one or several
hot plates do not switch off, the
appliance will be automatically
disconnected after a set amount of
time (see table 1).
Table 1
Selected power Maximum operating time
(in minutes)
1
520
2
402
3
318
4
260
5
212
6
170
7
139
8
113
9
90
When the “safety switch off” function
has been activated, a 0 is displayed if
the glass surface temperature is not
dangerous for the user or an H if there
is risk of burning.
To reconnect the appliance, switch it
off by pressing the off button (2) and
then on again.
Automatic cook start
This function makes cooking easier
because you do not have to be present.
The touch control preprogrammes
the chosen hot plate at the maximum
power and lowers it to the desired
power (which you have selected) after a
given amount of time (see table 2).
Table 2
Selected power
Automatic Cook Start
Function (Time in
seconds)
1
50
2
90
3
150
4
220
5
320
6
540
7
150
8
240
9
—
