22
TECHNICAL PASSPORT
ENGLISH
Extractor hood
Replacing lamps
Before replacing lamps, disconnect the appliance from the power supply. Then,
with a screwdriver, pry and remove the lamp cover, while supporting it from below.
Remove the burned-out lamp and replace it with a new one. Put the lamp cover into
place, press it slightly and fix it. Caution: do not touch the halogen lamp with your
fingers, it significantly reduces its lifetime. Use a soft, dry cloth.
Caution!
If you need to transport the air cleaner, first of all, disconnect it from the power
supply and proceed with disassembly. It is recommended that you transport it in the
original packaging. If this packaging is not available, package the appliance using
materials that prevent possible damage resulting from transportation.
SECTION 6.
Troubleshooting
Very often a malfunction of the appliance occur for minor reasons. So, before you
call for service center, please check whether you can troubleshoot yourself. For this
purpose please check the following possible causes of malfunctions.
Malfunction
Possible cause
Troubleshooting action
The appliance does not
operate
...Faulty fuse
...Plug is not properly
inserted into the outlet
...There is no voltage in
the power supply system
1. Check the fuse of the
appliance
2. Make sure that plug is
properly inserted into the
outlet
Suction power is not
sufficient
...Incorrect speed
selected
...Filters are clogged
1. Increase suction speed of
hood
2. Clean or replace filters
The lamp is not
lighting
...Faulty fuse
...The lamp is burned out
or incorrectly installed
1. Check the fuse of the
appliance
2. Make sure that the lamp
is installed correctly or
replace it
