4 / 11
6) Click “Yes” to save data after calibration completed.
1.6 Setting display resolution
Please adopt recommended display resolution. If revise, please click right menu (refer
to 4.3 to operate), select “screen resolution” for setting.
1.7 Adjust display orientation
The tablet comes with G-sensor. It will adjust the display orientation according to the
users’ handing orientation for comfortable vision. If you want to cancel this function,
please click “control panel”, select “adjust screen resolution”, then click “orientation” to
set display orientation.
2. Drivers
2.1 Default Device Driver
KUPA has installed necessary driver. You don’t need additional installation.
Please note: The tablet has been optimized on driver for hardware feature. KUPA does
not recommend users to update or install non-official updated driver. Any improper
operation is at users’ risk.
2.2 Install/Update Driver
l
The official driver may contain Setup.exe file. Please dual click to operate default
installation.
l
If without Setup.exe file, please long press “computer” icon, then click “properties” to
select “device management”. Right click the device , and select “properties”, click
“driver”, then “update driver”, choose a specific location (disk symbol: \folder) to
place the drivers , then select the driver and follow the prompt to operate.
3. Networking
3.1 connect to Internet
X15 can connect to the Internet through Wi-Fi.
3.2 WiFi connection
1) Click on at the lower right corner 2) Select the target Wireless Access Point, click
“connect"
3.3 wired connection