12
13
Warning:
Failure to install the screws or fixing the device in
accordance with these instructions may result in electrical hazards.
2.2. using the Product
2.2.1. operation
How to use the control panel (See Pic 8):
a. Press the button “Stop”, the motor will stop.
b. Press the button “Low”, the motor will run at low speed.
c. Press the button “Mid”, the motor will run at medium speed.
d. Press the button “High”, the motor will run at high speed.
e. Press the button “Light”,
the
light will switch on. Press the button
again; the light will switch off.
Pic 8
2.2.2. LED Light
•
If the supply cord or LED bulb are damaged, it must be replaced
by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Il coS D code for 2.5W leD light
is DBS-2.5/65-H-120/33
2.5W leD light
Pic 7
outdoor air
ventilation
Indoor air
ventilation
Exaustor-KCHS3125-IX-Manual-1.indd 12
17/06/20 15:15
