20
21
1)
If the condenser is at the back of the appliance
• Do not allow such substances to come into contact with the
appliance’s parts.
• Do not use any abrasive cleaners.
• Remove the food from the freezer. Store it in a cool place, well
covered.
• Switch the appliance off and remove the plug from the mains, or
switch off or turn out the circuit breaker of fuse.
• Clean the appliance and the interior accessories with a cloth
and lukewarm water. after cleaning, wipe it with fresh water and
rub dry it.
• After everything is dry place the appliance back into service.
Defrosting the freezer
The freezer compartment, however, will become progressively
covered with frost, which should be removed. Never use sharp metal
tools to scrape off frost from the evaporator as you could damage it.
However, when the ice becomes very thick on the inner liner,
complete defrosting should be carried out as follows:
• unplug the appliance from the socket;
• remove all stored food, wrap it in several layers of newspaper and
put it in a cool place;
• keep the door open, and place a basin underneath the appliance to
collect all defrost water;
• when defrosting is complete, dry the interior thoroughly
replace the plug back in the socket to run the appliance again.
replace the lamp
Caution!
Before replacing the lamp,
please disconnect the appliance from the
main power supply.
The lamp’s specifications are listed on the rating plate.
Please follow below process to replace the lamp:
1.
Set the temperature regulation knob at number “0” to switch off
the appliance.
2.
unplug the appliance to make sure it is disconnected from the
main power supply.
3.
Remove the screw of the lamp cover.
4.
Pull the lamp cover out.
5.
unscrew the lamp.
6.
Fit the new lamp in the opposite direction, then put the lamp cover
and screw back on.
7.
Plug in the appliance and regulate the knob to the correct position.
Frigo-KC3120-Manual-1.indd 20
18/02/06 11:36
