XPS-E
12 / 36
8
XPS-E Status
See Chapter „E
xternal Device
Diagnostics”
[
}
25]
9
Baud Rate of the serial
interface
See Chapter „Parameterization“, Section
„Baud Rate“ [
}
10]
10
Character Transmis-
sion Mode of serial
interface
See Chapter „Parameterization“, Section
„Character Transmission Mode“ [
}
10]
11
Handshake setting
serial interface
See Chapter „Parameterization“,
Section
„Handshake“ [
}
10]
12
XOFF-Timeout of
serial interface
See Chapter „Parameterization“,
Section
„XOFF“ [
}
10]
13
Receive Mode of DP-
interface
See Chapter „Parameterization“, Section
„Data Transmission Mode“ [
}
10]
14
Setting of driver phys-
ics of serial interface
(RS232/485)
See Chapter„
Parameterization
“,
Section „Data Transmission Mode“ [
}
10]
15
Trigger character for
Serial triggerd Mode
0x0A
Table 2:
slave_diag
Parameter Description
The parameters marked with (*) are the default values. These are
used if inadmissible parameters are entered during parameterization.
Baud Rate
Baud Rate (bit/s)
Value (dec) Value (hex)
150
1
0x01
300
3
0x03
600
6
0x06
1.200
12
0x0C
2.400
24
0x18
4.800
48
0x30
9.600 *
96
0x60
19.200
192
0xC0
Table 3:
Baud Rate of Serial Interface Oktet 12
Put into operation