2). ADD WATER: water shortage alarm
When the “ADD WATER” light turns red, it means that there is water shortage in the water tank. You
need to add water and press the ON/OFF button to restart the machine.
3)
ICE FULL: Ice full alarm
When the ice reaches the maximum capacity of the ice storage container, the "ICE FULL" light flashes,
and the machine stops. At this time, the ice needs to be poured out. When the ice position is lower
than the full sensor position, the machine will restart automatically.
4)
ICE MAKING: Ice making
When this light is always on, it means that the ice maker is making ice.
5)
CLEAN: Cleaning function
Plug in the power, the "ICE MAKING" indicator flashes. After pressing the “Clean” button, the product
cleaning function starts, and the cleaning duration is 150s. Do not disconnect the power supply during
the cleaning. After the cleaning, the product automatically enters the standby mode.
OPERATING INSTRUCTIONS
Step 1
Open the lid and take out the basket and add water to the reservoir.
Note: There is a maximum scale MAX in the reservoir. The water should not exceed the MAX position.
If the water exceeds the maximum scale MAX, you need to open the bottom drain plug, release the
excess water, and cover with a transparent cover.
Step 2
Plug in the power and press the “ON/OFF” button to start the machine.
In the first three cycles, the ice is small and irregular.
When the ice basket is full, please take out the ice immediately, do not let the ice overflow the ice
basket.
1. When the indoor temperature is lower than 15 degrees, please choose small ice. When the indoor
temperature is higher than 30 degrees, it is recommended to choose big ice.
2. The three cycles used for the first time, the ice produced is small and irregular.
3. When the ice basket is full, please take out the ice immediately, do not let the ice overflow the ice
basket
CLEANING & USE GUIDANCE
1. Clean the inner liner, ice collecting tray, water box, ice shovel and evaporator frequently. When
cleaning, unplug the unit and remove the ice cubes. Use a diluted solution of water and vinegar to
clean the inside and the outside surface of the Ice maker. Do not spray Ice maker with chemicals
6
