Kuka KUKA.EthernetKRL 2.2 Скачать руководство пользователя страница 17

Страница: 17 / 79

17 / 79

Issued: 19.12.2012 Version: KST EthernetKRL 2.2 V1 en (PDF)

4 Installation

Installation

4.1

System requirements

Hardware



KR C4 robot controller



External system

Software



KUKA System Software 8.2 or 8.3

4.2

Installing or updating EthernetKRL

Preparation



Copy software from CD to KUKA USB stick.
The software must be copied onto the stick with the file Setup.exe at the
highest level (i.e. not in a folder).

Precondition



“Expert” user group

Procedure

1. Connect the USB stick to the robot controller or smartPAD.
2. In the main menu, select

Start-up

Additional software

3. Press

New software

. The entry

EthernetKRL

must be displayed in the

Name

column and drive

E:\

K:\

in the

Path

column.

If not, press

Refresh

4. If the specified entries are now displayed, continue with step 5.

If not, the drive from which the software is being installed must be config-
ured first:



Press the

Configuration

button. A new window opens.



Select a line in the

Installation paths for options

area.

Note:

If the line already contains a path, this path will be overwritten.



Press

Path selection

. The available drives are displayed.



Select

E:\

. (If stick connected to the robot controller.)

Or select

K:\

. (If stick connected to the smartPAD.)



Press

Save

. The window closes again.

The drive only needs to be configured once and then remains saved for
further installations.

5. Mark the entry

EthernetKRL

and click on

Install

. Answer the request for

confirmation with

Yes

6. Confirm the reboot prompt with

7. Remove the stick.
8. Reboot the robot controller.

LOG file

A LOG file is created under C:\KRC\ROBOTER\LOG.

It is advisable to archive all relevant data before updating a software
package.

Recommendation: Always use KUKA sticks. Data may
be lost if sticks from other manufacturers are used.

Содержание KUKA.EthernetKRL 2.2
















































































Результаты поиска

Содержание KUKA.EthernetKRL 2.2

Отзывы:

Похожие инструкции для KUKA.EthernetKRL 2.2

Бренды по названию

Популярные бренды

Kuka KUKA.EthernetKRL 2.2, Руководство пользователя

Результаты поиска

Содержание KUKA.EthernetKRL 2.2

Отзывы:

Похожие инструкции для KUKA.EthernetKRL 2.2

Бренды по названию

Популярные бренды