User Manual
KEA 350 P1 / KEA 350 RP-P1
BA-KEA 350 P1/ KEA 350 RP-P1_EN Version 03
Datum: 17.Sep.2020
Seite 13 von 21
Generator/Mains (LS5)
-
Generator values as described above
and additionally for mains values measured by LS-5, if an application mode (parameter 3444 p. 228)
with L-MCB is selected.
-
Voltage
-
Power
-
Frequency
Fig. 9:
AnalogManagers for "Engine" values at Home Screen
Engines" parameter selection
The values to be displayed at "Engines" can be selected via AnalogManager
definition of the parameters at “Parameter
Configure HMI
Screen configuration”. Menu texts and symbols cannot be changed!
4
Operation
In operation the genset controller can be manually or remote controlled.
Front panel access is described in chapter 4.1 “Front Panel Access” on page 98.
Access via ToolKit is described in chapter 4.2.6 “View And Set Values In ToolKit” on page 133.
Access via Remote Panel RP 300 is described in chapter and the Technical Manual “37593 RP 300” .
Access via PLC depends on the interface and the data telegram used for communication.
For menu structure/menu tree see “Menu structure (menu tree)” on page
96.
