Kuhnt AS55 Series, Руководство по обслуживанию

Страница: 117 / 173

SERVICE MANUAL AS55X
55Xseries_manual_V3.22 (18-08-15) www.kuhnt.com 115

Check speed dialling list with every digit from GSM
Normally with every received digit, the dialled number will be searched in the
regarding speed dialling list. But if it should be possible to dial long numbers that
have the same beginning as whole short numbers, this box must be unchecked. In
this case, the speed dialling list will be checked after the dialled number is detected
as complete.
Default value: checked

Allow complete number dialling from GSM
If dialling of complete VOIP numbers is allowed, protection against misuse is strongly
recommended. This can be done by restricting the access to VOIP to a couple of
dedicated users. Therefore use the menu “GSM access” / “by GSM channel” (see
5.10.2) and “by GSM number” (see 5.10.3)
Default value: checked

Default destination, if invalid or no dialling from GSM
Fill in a destination number to be called, if no DTMF dialling is made by the calling
participant within 15 seconds.
Default value: not reported
Notice: Settings in menu “By GSM channel” or in menu “By GSM number“
will overrun this setting.