KUHN Venta 3030, Руководство оператора

Страница: 78 / 136

Venta 3030-3530-4030
76
9. - Instructions for work
RN034AGB D
Seed Drill
9.3.4 Filling the hopper

Use the step
Avoid exceeding the maximum authorized
load.
Only use dry, clean seeds without foreign
bodies.
To prevent clogging or damage due to
foreign bodies, the ringed column cover and
sieve must be lowered in position
- Pull the handle (1) to open the locking.
- Maintain and use the step at the level of the
handle (2).
- Release the handle (1).
1
2
Between the metering unit and the hopper base,
there is a hatch that stops the seeds from entering
the metering unit during transport or hopper filling.
- Remove tube clip .
- Insert stop plate (1).
- Insert and lock lynch pin.
1