KUHN GMD802 Series, Руководство оператора

Страница: 40 / 72

Disc mower
38
GMD802
Instructions for work
$ Instructions for work
1. Putting the machine into work
position
From the transport position:
- Pull the release cord until transport lock is released.
- Activate the transport/work cylinder control valve in
the "pivot into work" position.
- Activate the transport/work cylinder control valve in
the "lift into headland turn" position.
- Lower the tractor three-point linkage:
H = 600 mm (2’).
The machine is in headland turn position.
Lower the mowing unit onto the ground using the
mowing unit lift cylinder.
Shift the mowing unit lift cylinder directional control valve
in float position.
The machine is in working position.
Before placing the machine in working
position:
- Wait until the rotating parts have come
to a complete stop.
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the
person moves away.
If the tractor is fitted with a hydraulic valve with
adjustable flow rate, reduce oil flow to limit
pivoting speed.
During work, only use the mowing unit lift
cylinder to place the machine in headland
turn position.