KUHN GMD800GII-FF, Руководство оператора

Страница: 35 / 88

Putting into service
Disc mower
GMD800GII-FF
33
-
On machine side, attach guard chain to the main frame.
„
Adjusting the machine
Frame height and check chains.
- Tractor fitted with a hydraulic position control function:
• Lower tractor lift linkage in order to engage lift stop
(1) in its housing.
• Respect a lift stop functional play A of 3 mm (0.1’’).
• Note the corresponding lever position in the tractor
cab.
Tractor not fitted with a hydraulic position control
function:
• Attach hook of check chain supplied with the
machine in one of the upper holes of the tractor top
link yoke.
• Lower the machine until the check chain is under
tension.
• Respect a lift stop functional play A of 3 mm (0.1’’).
The tractor lift linkage is in working position.
The frame height is correct when:
• The cutterbar is resting on the ground.
• The check chain is under tension.
• The lift stop has a functional play of approximately
3 mm (0.1’’) in its housing.
• The 2 hitch pins are parallel to the ground.
Close hook eyelet with roll pin when properly adjusted.
Immediately replace any worn or damaged
guard.
It is not necessary to use the check chain
supplied with the machine.