Instructions for transport
Disc mower
GMD702F
37
2. Conformity with the road regulations
Lighting and signalling device (optional equipment)
Check that the light boards are clean and that the lighting
equipment functions before transporting the machine on
public roads.
Before driving onto a main road, ensure that upper edge
of signalling panel is not more than 1.5 m (4’11’’) from
the ground.
Before driving the machine on public roads,
ensure that the machine complies with
current highway code regulations.
Before driving onto a main road, employ a
person to give the driver indications to
manoeuvre safely:
- When leaving the farm.
- On emerging roads.
- At junctions.
Fit additional lights on the tractor if the
original ones are covered by the machine;
(see tractor dealer).
The additional lights must not be mistaken
for the working lights fitted on top of certain
tractors.
It is forbidden to use working lights as low-
beam headlights.
Only one pair of low-beam headlights can be
switched on at the same time.
Immediately replace any worn or damaged
signalling panels or lights.
