KUHN GF7702T, Руководство оператора

Страница: 48 / 72

Gyrotedder
46
GF7702T
Optional equipment
3. Prop wheel
Kit no. 1126340
The prop wheel provides better adaptation to irregular
ground contours.
The prop wheel can be fitted either on the right or left
side of the front frame.
Machine use
Putting the machine into work position
- Place the machine in working position.
- Lower the prop wheel using handle (1) until it touches
the ground.
- Remove lynch pin (2).
- Remove drawbar lock pin (3) and position it in hole (4).
- Insert roll pin (2) to secure pin.
- Give a few additional handle turns to ensure that the
additional support wheel is always in contact with the
ground.
Putting the machine into transport position
From the working position:
- Remove lynch pin (2).
- Insert drawbar lock pin (3) in hole (4).
- Insert roll pin (2) to secure pin.
- Raise support wheel using handle (1).