KUHN EL 131, Руководство по сборке и эксплуатации, Страница: 25 / 48

- 23 -
5° LEVELLING BAR (photo 20)
Kit no. 120 6520 for 2.50 m (8’2")
Kit no. 120 6530 for 3.00 m (9’10")
A levelling bar (N) can be fitted to the front of the
EL 131 as shown in photo 20. It is adjustable in
height by means of 2 pins (K) to adapt to type of
terrain and desired working depth. The levelling bar
pre-levels irregular terrain and helps break up large
dry clods.
Always fit the levelling bar in such a
way that the angled edge faces the
front (as seen in the forward direc-
tion).
6° TRACK ERADICATORS
Kit no. 120 6550
To erase tractor wheel tracks, track eradicators, available as optional equipment, can be fitted to cross tubes
(T) (photo 21). These can be fitted in different ways, with or without supports (S), depending on the type of
tractor and the tire size. It is up to the operator to fit these in the most suitable way. Support (R) can be
adjusted sideways. Make sure fitting is symmetrical to the tractor wheels (photo 22).
We recommend track eradicators be 200 mm (8") apart (photo 22). Share (P) working depth should be
adjusted in accordance with track depth and should not be more than 10 cm (4"). Do not forget to tighten the
screws (V) and their lock nuts after adjustment (photo 21). Keep the front guards in the correct position.
NOTE : ONLY USE TRACK ERADICATORS WHEN WORKING ON PLOWED GROUND.